holden.wiki

• MODEL SELECTION INDEX
• MY2006 VZ Series - Service Information - Update
• Section 6A4 Engine Mechanical – GEN IV V8
  • 1 General Information
    • 1.1 Engine Views
      • Engine View Left-hand Side
      • Lower Engine Assembly
      • Cylinder Head
      • Intake Manifold
    • 1.2 Engine Serial Number
    • 1.3 Engine Construction
      • Cylinder Block
      • Cylinder Heads
      • Valve Train
      • Crankshaft
      • Piston and Connecting Rod
      • Camshaft and Drive
      • Intake Manifold
      • Exhaust Manifold
      • Oil Pan
    • 1.4 Engine Lubrication System
      • Oil pump
      • Oil Flow
      • Oil Seals
      • Positive Crankcase Ventilation System
    • 1.5 Service Notes
  • 2 Diagnosis
    • 2.1 General Information
  • 3 Minor Service Operations
    • 3.1 Air Intake Duct Resonator
      • Remove
      • Reinstall
    • 3.2 Engine Dress Cover
      • Remove
      • Reinstall
    • 3.3 Oil Pressure Sensor
      • Remove
      • Reinstall
    • 3.4 Oil Level Indicator and Tube
      • Remove
      • Reinstall
    • 3.5 Crankcase Ventilation Hoses/Pipes
      • Remove
      • Reinstall
    • 3.6 Intake Manifold Assembly
      • Remove
        • Disassemble
        • Clean and Inspect
        • Reassemble
      • Reinstall
    • 3.7 Coolant Vapour Vent Pipe and Covers
      • Remove
      • Reinstall
    • 3.8 Engine Valley Cover
      • Remove
        • Clean and Inspect
      • Reinstall
    • 3.9 Hydraulic Valve Lifters
      • Remove
      • Disassemble
      • Clean and Inspect
      • Reassemble
      • Testing Lifter Leak-down Rate
      • Reinstall
    • 3.10 Crankshaft Balancer
      • Remove
      • Clean and Inspect
      • Reinstall
    • 3.11 Crankshaft Front Oil Seal
      • Remove
      • Reinstall
  • 4 Major Service Operations
    • 4.1 Engine Assembly
    • 4.2 Oil Pan Assembly
    • 4.3 Engine Front Cover
      • Remove
      • Clean and Inspect
      • Reinstall
    • 4.4 Crankshaft Spigot Bearing
      • Remove
      • Reinstall
    • 4.5 Oil Pump, Pump Screen and Deflector
      • Remove
      • Oil Pump Disassemble
      • Clean and Inspect
      • Oil Pump Reassemble
      • Reinstall
    • 4.6 Timing Chain and Sprockets
      • Remove
      • Clean and Inspect
      • Reinstall
  • 5 Specifications
    • 5.1 Engine
    • 5.2 Lubrication System
  • 6 Torque Wrench Specifications
    • 6.1 Engine
    • 6.2 Special Tool Fasteners
  • 7 Special Tools